Hi,
I'm struggeling with my TWINHAN DVB-S card on Kernel 2.6.16
It was working before, and asfaik I didn't change anything this day. I only
rebooted once.
I recompiled several times, but always got the same problem, that the DMA
core of the card cannot be determined.
I already turned off ALSA support for bt878, no success. I also set the
PCI latency in BIOS to 32, nothing....
When I compare the /var/log/messages from the time where it worked and where
it fails I see the following difference:
This is where it fails : bt878_probe: card
id=[0x1fefe], Unknown card.
When working it got a different card id : bt878_probe: card id=[0x11822],[
Twinhan VisionPlus DVB ] has DVB functions.
Any ideas ?? I've attached all logs which I think could help.
works:
Mar 30 07:53:05 Coruscant kernel: bttv: driver version 0.9.16 loaded
Mar 30 07:53:05 Coruscant kernel: bttv: using 8 buffers with 2080k (520
pages) each for capture
Mar 30 07:53:05 Coruscant kernel: bttv: Bt8xx card found (0).
Mar 30 07:53:05 Coruscant kernel: ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI
21 (level, low) -> IRQ 217
Mar 30 07:53:05 Coruscant kernel: bttv0: Bt878 (rev 17) at 0000:02:0d.0,
irq: 217, latency: 64, mmio: 0xefefe000
Mar 30 07:53:05 Coruscant kernel: bttv0: detected: Twinhan VisionPlus DVB
[card=113], PCI subsystem ID is 1822:0001
Mar 30 07:53:05 Coruscant kernel: bttv0: using: Twinhan DST + clones
[card=113,insmod option]
Mar 30 07:53:05 Coruscant kernel: bttv0: gpio: en=00000000, out=00000000
in=00f500fe [init]
Mar 30 07:53:05 Coruscant kernel: bttv0: using tuner=4
Mar 30 07:53:05 Coruscant kernel: bttv0: add subdevice "dvb0"
Mar 30 07:53:05 Coruscant kernel: bt878: AUDIO driver version 0.0.0 loaded
Mar 30 07:53:05 Coruscant kernel: bt878: Bt878 AUDIO function found (0).
Mar 30 07:53:05 Coruscant kernel: ACPI: PCI Interrupt 0000:02:0d.1[A] -> GSI
21 (level, low) -> IRQ 217
Mar 30 07:53:05 Coruscant kernel: bt878_probe: card id=[0x11822],[ Twinhan
VisionPlus DVB ] has DVB functions.
Mar 30 07:53:05 Coruscant kernel: bt878(0): Bt878 (rev 17) at 02:0d.1, irq:
217, latency: 64, memory: 0xefeff000
Mar 30 07:53:05 Coruscant kernel: DVB: registering new adapter (bttv0).
Mar 30 07:53:05 Coruscant kernel: ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI
20 (level, low) -> IRQ 209
Mar 30 07:53:05 Coruscant kernel: usb 2-1: new low speed USB device using
uhci_hcd and address 2
Mar 30 07:53:05 Coruscant kernel: dst_get_device_id: Recognise [DST-03T]
Mar 30 07:53:05 Coruscant kernel:
Mar 30 07:53:05 Coruscant kernel: DST type flags : 0x2 ts204 0x4 symdiv 0x10
firmware version = 2
Mar 30 07:53:05 Coruscant kernel: dst_get_mac: MAC
Address=[00:08:ca:14:20:00]
Mar 30 07:53:05 Coruscant kernel: DVB: registering frontend 0 (DST DVB-S)...
failed:
Apr 19 16:28:29 Coruscant kernel: bttv: driver version 0.9.16 loaded
Apr 19 16:28:29 Coruscant kernel: bttv: using 8 buffers with 2080k (520
pages) each for capture
Apr 19 16:28:29 Coruscant kernel: bttv: Bt8xx card found (0).
Apr 19 16:28:29 Coruscant kernel: ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI
22 (level, low) -> IRQ 169
Apr 19 16:28:29 Coruscant kernel: bttv0: Bt878 (rev 17) at 0000:02:0a.0,
irq: 169, latency: 32, mmio: 0xefefe000
Apr 19 16:28:29 Coruscant kernel: bttv0: subsystem: fefe:0001 (UNKNOWN)